Components & controls
ebm-papst FanGrid Retrofit Cuts Printing-Plant Ventilation Power by ~50%
A two-unit FanGrid installation with RadiPac EC fans replaced a 40-year-old ventilation system at Mayr Miesbach's printing facility in three days of continuous operation. The supplier reports approximately 50 percent lower electrical consumption and improved temperature and humidity control.

ebm-papst published a case study on 18 November 2026 describing the modernization of a roughly 40-year-old ventilation plant at the Mayr Miesbach printing facility. The supplier reports that the retrofit reduced electrical power consumption by approximately 50 percent while improving temperature and humidity control.
Equipment and capacity
The installation comprises two FanGrid units, each fitted with six third-generation RadiPac EC fans. Together they deliver a stated 80,000 m³/h at approximately 800 Pa. The multi-fan configuration provides redundancy; if one fan fails, the remaining units continue to operate subject to available capacity.
Controls and execution
Building automation enables demand-based operation of the fans. According to ebm-papst, the retrofit was completed in three days while printing production continued uninterrupted.
Caveat
The figures above are supplier-reported project results. They do not constitute an independently normalized annual-energy measurement or a guarantee applicable to other buildings.
ORIGINAL SOURCE
ebm-papst ↗Visit the original source for additional details.


